PRESS RELEASE
DAVOS, SWITZERLAND, 23 JANUARY 2020
SABIC REVEALS PLANS FOR TRUCIRCLE™ SOLUTIONS TO CLOSE THE PLASTICS LOOP IN 2020

 

  • SABIC reveals its intentions at World Economic Forum, Davos, for TRUCIRCLE™ solutions to drive to close the plastics loop in 2020 
  • TRUCIRCLE™ circular solutions and global collaborations demonstrate commitment and further progress towards closing the loop
  • New collaborations take the organisation ever closer to bringing its new semi-commercial plant online, which is expected to be operational in 2021

 

 

SABIC, a global leader in the chemical industry, has revealed its intentions for TRUCIRCLE™ solutions to drive to close the loop on plastics waste in 2020, together with global collaborators. 

 

Ambitions were shared during a reception, hosted by SABIC Vice Chairman & CEO, Yousef bin Abdullah Al-Benyan, during the 2020 World Economic Forum (WEF) in Davos, Switzerland. Business representatives came together at the iconic, energy-efficient, quick to construct and reusable ICEHOUSE™ building, constructed using SABIC materials. The ICEHOUSE™ with ICE standing for “Innovation for the Circular Economy”, was a fitting venue for the occasion, underlining a key strategic sustainability priority for SABIC.

 

Closed loop recycling of plastic will see post-consumer plastic waste collected, recycled and used to make new products. For this vision to actually work, consumers, retailers, recyclers and manufacturers must work together to reclaim valuable materials from our waste stream and process them to make new products. This process requires a total transformation of the value chain, which SABIC has been working hard with its downstream and upstream collaborators to achieve.

 

SABIC has driven significant advancements to date and is leading the way in the drive to close the loop through alliances with partners, customers and collaborators across the value chain. During the past 12 months, SABIC customers and brandowners, such as Unilever and Tupperware Brands,  have pioneered and brought to market an array of commercially viable and highly anticipated consumer products which leverage SABIC’s ground-breaking TRUCIRCLE™ solutions made possible by a collaboration with UK-based Plastic Energy Ltd. which enables the recycling of plastic waste which has historically been classified as non-recyclable.

 

SABIC developments have led to the launch of TRUCIRCLE™, a complete portfolio of solutions that span design for recyclability, mechanically recycled products, certified circular products from feedstock recycling of plastic waste streams and certified renewables products from bio-based feedstock. Since the launch in late 2019, TRUCIRCLE™ has received unprecedented demand from businesses looking for commercially and environmentally viable solutions which help to address the plastic waste challenge. 

 

Mark Vester, Circular Economy Leader at SABIC, said: ‘At SABIC, we firmly believe that true collaboration and innovation will drive positive change, and we’ve collaborated with a wide range of companies across the value chain to get to where we are today. With our TRUCIRCLE™ initiative, we’re more committed than ever to building a circular economy and closing the loop on plastic waste in 2020.

 

‘2020 will see us forge bold, new collaborations with high calibre partners  in order to create a circular, transparent and sustainable economy for plastics, and we invite players from across the value chain to join us to truly transform our world.’

 

SABIC has also confirmed new collaborations to take the organisation ever closer to bringing its new semi-commercial plant online. The new facility in the Netherlands, located at SABIC’s Geleen site, will increase the production of pyrolysis oil from plastic waste, and is expected to be operational by 2021. Certified circular polymers will be produced from a feedstock known as Tacoil – a patented product from UK-based Plastic Energy Ltd. – from the recycling of low quality, mixed plastic waste otherwise destined for incineration or landfill.

 

With new agreements established recently, Danish company, Haldor Topsøe, will provide license and basic engineering for a novel hydrotreating solution, and Renewi, a leading waste to product company, will build a dedicated formulation line that will supply feedstock from mixed plastic waste for the pyrolysis process.

 

The output from the site will initially provide materials for SABIC’s downstream collaborators but the long term intention is to rapidly scale up the supply of its certified circular polymers for all global customers.

 

As part of its commitment to closing the loop, SABIC became a founding member of the World Plastics Council and the Alliance to End Plastic Waste and a partner of The Ocean Clean-Up. Each initiative aims to prevent plastic waste from reaching marine environments and ecosystems or to remove them. The organisation also sees each of its TRUCIRCLE™ solutions as a firm contribution to its efforts to meet the UN Sustainable Development Goals.

 

SABIC’s commitment to using more plastic waste as feedstock for its circular polymers runs parallel to its 2020 ambition to increase the uptake of recycled plastic from mechanical recycling. SABIC is determined to increase the amount of plastic it processes in Europe to 200.000 metric tons by 2025, in line with its pledge to the EU Commission.

 

ENDS

 

NOTES TO EDITORS

  • SABIC and brands marked with ™ are trademarks of SABIC or its subsidiaries or affiliates.
  • High-resolution photos are available upon request. 
  • SABIC should be written in every instance in all uppercase.
  • © 2020 Saudi Basic Industries Corporation (SABIC). All Rights Reserved.
  • Any brands, products or services of other companies referenced in this document are the trademarks, service marks and/or trade names of their respective holders.

 

ABOUT SABIC

 

SABIC is a global leader in diversified chemicals headquartered in Riyadh, Saudi Arabia. We manufacture on a global scale in the Americas, Europe, Middle East and Asia Pacific, making distinctly different kinds of products: chemicals, commodity and high-performance plastics, agri-nutrients and metals. 

 

We support our customers by identifying and developing opportunities in key end markets such as construction, medical devices, packaging, agri-nutrients, electrical and electronics, transportation and clean energy.

 

SABIC is a global leader in diversified chemicals headquartered in Riyadh, Saudi Arabia. We manufacture on a global scale in the Americas, Europe, Middle East and Asia Pacific, making distinctly different kinds of products: chemicals, commodity and high performance plastics, agri-nutrients and metals.

 

We support our customers by identifying and developing opportunities in key end markets such as construction, medical devices, packaging, agri-nutrients, electrical and electronics, transportation and clean energy.

 

SABIC recorded a net profit of US$ 5.7 billion in 2018. Sales revenues for 2018 totaled US$ 45 billion while total assets stood at US$ 85 billion. Production in 2018 was 75.3 million metric tons.

 

SABIC has more than 33,000 employees worldwide and operates in around 50 countries. Fostering innovation and a spirit of ingenuity, we have 11,738 global patent filings, and have significant research resources with innovation hubs in five key geographies – USA, Europe, Middle East, South Asia and North Asia.

 

SABIC Media Contacts

 

Lindsay Clarkmead

E: lindsay.clarkmead@sabic.com

T: +34 968 127 740

 

Marketing Solutions

Kevin Noels

E: knoels@marketing-solutions.com 

T: +32 3 31 30 311

 

This press release and relevant photography can be downloaded from www.PressReleaseFinder.com.

Alternatively for very high resolution pictures please contact: 

Kevin Noels (knoels@marketing-solutions.com, +32 3 31 30 311).

To visit the Client Portal please click here.

Copyright © 2020 PLASTIC ENERGY . All rights reserved.
Website by Idea East